+

Please confirm you are not a robot

Sky Rider Phoenix Quadcopter Drone with Wifi Camera

VEJDS

SKU: 286395

Special Price $8.72 Regular Price $49.98
  • 360 degree flips & tricks
  • 6-axis gyroscope
  • 3 speeds: low, medium, high
  • Adjustable angle Wi-Fi camera
  • 2.4 GHz remote control
  • 4-channel direction control
  • Control distance: up to 328 feet
  • Headless mode
  • Altitude Hold
  • LED navigation lights
  • Stream live video to your smartphone or VR goggles
  • DC battery power: removable, rechargeable lithium polymer battery
  • Operating time: 6-8 minutes (per battery)
  • Charge time: 120 minutes
  • Drone weight: 100 grams / 3.52 oz. / 0.22 lb.
  • INCLUDES:
    • Remote control: requires 4 AA batteries (not included)
    • Phone holder
    • USB cable
    • Replacement rotors
    • Screwdriver
    • 30-Day Limited Warranty
    • User's guide
  • IMPORTANT NOTE: You alone are responsible for safely and responsibly flying your drone. For more information on Federal Aviation Administration rules and guidelines for flying unmanned aircraft systems (UAS), please visit the FAA website:

Explore the skies above at the speed of lightning with Sky Rider's Phoenix Quadcopter Drone with Wi-Fi Camera. Fly fast, weave in and out of obstacles, and perform 360 degree flips and tricks with ease (headless mode and altitude hold). With the built-in Wi-Fi camera you can capture every daring flight and share it with your friends.

How can I fly the drone with the remote?

Remote Link & Calibration

  • Before flying, the craft and the remote must be linked together and the gyroscopes on the craft must be allowed to calibrate.
  • Begin with the battery installed, the battery compartment closed, and the craft and remote powered OFF.

Step 1

  • Power ON the craft and place it on a flat surface. This is necessary for the craft's gyroscopes to properly align. The lights on the craft will blink as it searches for a signal from the remote.
  • Be sure the craft and yourself are facing the same forward direction, this will help with orientation while flying.

Step 2

  • Power ON the remote. The light on the remote will blink as it searches for the signal from the craft. An audible chime will sound when the remote and the craft have linked.

Step 3

  • Push the Left Control Stick (throttle) fully forward, wait for a chime to sound, then pull the stick fully rearward, and wait for a second chime.

Step 4

  • Press the Landing/Stop button to start the motors. After the motors have started, the craft will climb to a set height and hover in place. The craft is ready to fly.
  • Left Stick controls Altitude (throttle) and Yaw (spin).
  • Right Stick controls Pitch (forward/ backward) and Roll (left/right).

When You're Finished Flying

After landing, keep the Left Control Stick (throttle) in the lowest position and wait for the rotors to stop spinning. Power OFF the remote BEFORE powering OFF the craft. This will ensure that no signals are accidentally sent by the remote, reducing the chance of injury. After this is done, it is safe to pick up and power OFF the craft.

Emergency Stop

If the craft is having difficulty flying, is out of control, or otherwise behaving erratically, you can press and hold the Emergency Stop button to stop the rotors and the craft will fall to the ground.

What are the speed settings?

Press the Speed button on the remote to change the craft's speed setting.

  • Low: Provides smooth and predictable control of the craft. The remote will chime once to indicate the low speed setting.
  • Medium: The craft will move and respond faster to all control inputs. The remote will chime twice to indicate the medium speed setting.
  • High: Highest setting for maximum performance. The remote will chime three times to indicate the high speed setting.

How can I connect the drone to the app?

Scan the appropriate QR code with your smartphone or search for "Sky Rider Control" in the Apple App Store or Google Play Store.

Connect to Wi-Fi

  • NOTE: Wi-Fi control may be interrupted by interference from other nearby Wi-Fi equipment.
  • Before beginning, make sure your phone's Wi-Fi is enabled and the craft is powered ON.
  • From your smartphone, open the Wi-Fi settings menu, then search for and select Sky Rider xxxx to connect to the craft.
  • Once connected, open the app. You will see the Home Screen. From here you can adjust settings and start using the app.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account