DIG Solar Powered Digital Hose End Timer (Tap Timer) (EVO100)

DIG's EVO100 is a Solar Powered Hose End Tap Timer with a 3/4" female thread inlet and male thread outlet. Power is derived via a patented, time-tested internal photovoltaic module and microelectronic energy management system that is fueled by the surrounding ambient light (solar). After being charged, this efficient energy system provides enough power for the timer to function at any time, night or day, and in any weather with no direct sunlight required. This energy system also makes the timer environmentally friendly, functioning only on clean, renewable solar power without the need for a backup battery or AC power.

The EVO100 features a large, easy-to-read LCD screen and simple icon-based programming with weekly or cyclical programs, four start times per day, durations of up to six hours, program delay of up to 99 days, system off, manual operation and a sensor wire connection to accept a rain sensor.

Specifications

• Type: DC latch
• Waterproof: IP64 certified
• Operating pressure: 10 to 100 PSI (.7 to 6.8 bar)
• Flow range: .1 to 8 GPM (.38 to 30 L/H)
• Temperature range: 38-130°F (3-54°C)
• Connection: female hose thread inlet (FHT) x male hose thread outlet (MHT) or British standard thread for tap (BSP)
• Power source: ambient light (solar)
• Sensor connection: yellow wire for closed contact rain sensor
• Power source: Ambient light (PVM)
• Input: 3,000 - 100,000+ LUX
• Sensor connection: yellow wire for closed contact sensor
• Controller dimensions: 5.75" W x 6.76" H x 2.25" D (14.6 cm W x 17.1 cm H x 6.3 cm D)
• Unit Weight including plastic clam shell packaging: 1.02 pounds (.47 kg)
• Timer housing: high-impact plastic
• Inlet valve and solenoid: glass-reinforced nylon with stainless steel plunger and spring

Programming Options

Note: Before programming, the EVO 100 will need to be charged for one to two hours in direct sunlight to get up to full power. Once it's full, as long as it gets around 10 minutes of ambient light per day, it will stay at full charge.

• Watering duration: 1 minute up to 5 hours and 59 minutes set in 1-minute increments
• Watering frequency: weekly or cyclical schedule with odd days, even days or intervals from 1- 30 days, utilizing a 365 day yearly calendar with leap year.
• In the weekly schedule, the hose end timer (tap timer) can be programmed to operate on any day of the week, such as Monday, Wednesday, and Friday.
• In the cyclical schedule, the hose end timer can be programmed to operate on odd days, even days, or at specific intervals such as every three days.
• Up to four start times per day in weekly or cyclical schedule provides added flexibility for any type of watering application.
• Rain off/delay option with automatic restart up to 99 days
• Program off option stops program until reactivated
• Manual cycle via the program with automatic shutoff option