Stone Care 24 oz. Granite & Stone Sealer Spray

Directions:

1. Thoroughly clean surface with Stone Care International® Granite & Stone Daily Cleaner or Marble Daily Cleaner before sealing.
2. When surface is clean and completely dry, test Stone Care International® Granite & Stone Sealer in an inconspicuous area before use. Always use in a well-ventilated area.
3. Spray the entire surface until it is evenly wet. If sealer is absorbed immediately, apply another application to the surface.
4. Allow sealer to penetrate the surface for 5 minutes.
5. Wipe excess sealer from surface with a clean cotton cloth. If excess sealer dries on the surface, spray more sealer and wipe off immediately with a clean cotton cloth.
6. Allow sealer to cure 4—6 hours before using surface. Keep surface dry and free from substances that could stain for 24 hours.
7. For extra protection, apply a second coat.

Reseal stone every 6—12 months or as needed. To test, pour water (about 3 inches in diameter) on the surface in several locations and let it sit for 30 minutes. If you see a dark mark or ring